Synthesis and Characterization of Cassava Gum Hydrogel Associated with Chlorhexidine and Evaluation of Release and Antimicrobial Activity.

Hydrogels from natural sources are attracting increasing interest due to their ability to protect biologically active molecules. Starch extracted from cassava tubers is a promising material for synthesizing these hydrogels. Copolymerization of cassava gum and incorporation of chlorhexidine digluconate (CLX) into the hydrogels is confirmed by changes in the crystallographic profile, as observed through X-ray diffraction, and a shift in the 1000 cm-1 band in the Fourier-transform infrared spectroscopy spectrum. The differential scanning calorimetry reveals changes in the decomposition temperature of the synthesized hydrogels related to CLX volatility. Micrographs illustrate the material's porosity. Release tests indicate a constant linear release over 72 h, while antimicrobial activity against Staphylococcus aureus, Escherichia coli, and Candida albicans is satisfactory, with 100% effectiveness from 0.5% CLX and the formation of inhibition halos. Toxicity and biocompatibility studies show no cytotoxicity. The continuous release of chlorhexidine is promising for components of biomedical implants and applications as it can ensure antimicrobial action according to specific therapeutic needs.

Cashew gum hydrogel as an alternative to minimize the effect of drought stress on soybean.

The use of hydrogels helpsthe production of plants in drought-stress environments. Thus, this work evaluated using different hydrogels to minimize drought stress in soybean cultivation. The treatments employed two different hydrogels, one already commercialized and the other produced with cashew gum (Anacardium occidentale), five levels (0, 30, 60, 120, and 240 mg pot-1) of the hydrogels, and two levels of drought stress in sandy soil. The growth and yield of soybeans and the levels of macro- and micronutrients in soybeans were evaluated.growth. The use of CG hydrogel promoted 12% increase in protein content in the seeds in the when soybean plants were subjected to drought stress. The levels of 30 mg pot-1, corresponding to 7.5 kg ha-1, improved the 'morphological and productive parametersof the soybeans. The increasing levels of hydrogel promoted the increase in P, K, Ca, Mg, and Fe and reduced S and Cu on an exponential scale. The use of cashew gum hydrogel increased the K and Ca contents in soybean seeds compared to commercial hydrogel.

Production of galactan phthalates derivatives extracted from Gracilaria birdie: Characterization, cytotoxic and antioxidant profile.

The present work explores the esterification reaction in the polysaccharide extracted from the seaweed Gracilaria birdiae and investigates its antioxidant potential. The reaction process was conducted with phthalic anhydride at different reaction times (10, 20 and 30 min), using a molar ratio of 1:2 (polymer: phthalic anhydride). Derivatives were characterized by FTIR, TGA, DSC and XRD. The biological properties of derivatives were investigated by assays of cytotoxicity and antioxidant activity (2,2-diphenyl-1-picrylhydroxyl - DPPH and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt - ABTS). The results obtained by FT-IR confirmed the chemical modification, there was a reduction related to the presence of carbonyl and hydroxyl groups when compared to the in nature polysaccharide spectrum. TGA analysis showed a change in the thermal behavior of the modified materials. X-ray diffraction, it was shown that the in nature polysaccharide appeared as an amorphous material, while the material obtained after the chemical modification process had increased crystallinity, due to the introduction of phthalate groups. For the biological assays, it was observed that the phthalate derivative was more selective than the unmodified material for the murine metastatic melanoma tumor cell line (B16F10), revealing a good antioxidant profile for DPPH and ABTS radicals.

Novel Scaffold Based on Chitosan Hydrogels/Phthalated Cashew Gum for Supporting Human Dental Pulp Stem Cells.

Hydrogels are structures that have value for application in the area of tissue engineering because they mimic the extracellular matrix. Naturally obtained polysaccharides, such as chitosan (CH) and cashew gum, are materials with the ability to form polymeric networks due to their physicochemical properties. This research aimed to develop a scaffold based on chitosan and phthalated cashew tree gum and test it as a support for the growth of human mesenchymal stem cells. In this study, phthalation in cashew gum (PCG) was performed by using a solvent-free route. PCG-CH scaffold was developed by polyelectrolyte complexation, and its ability to support adherent stem cell growth was evaluated. The scaffold showed a high swelling rate. The pore sizes of the scaffold were analyzed by scanning electron microscopy. Human dental pulp stem cells (hDPSCs) were isolated, expanded, and characterized for their potential to differentiate into mesenchymal lineages and for their immunophenotypic profile. Isolated mesenchymal stem cells presented fibroblastoid morphology, plastic adhesion capacity, and differentiation in osteogenic, adipogenic, and chondrogenic lineages. Mesenchymal stem cells were cultured in scaffolds to assess cell adhesion and growth. The cells seeded on the scaffold showed typical morphology, attachment, and adequate distribution inside the matrix pores. Thus, cells seeded in the scaffold may improve the osteoinductive and osteoconductive properties of these biomaterials.

Biopolymer from Water Kefir as a Potential Clean-Label Ingredient for Health Applications: Evaluation of New Properties.

The present work aimed to characterize the exopolysaccharide obtained from water kefir grains (EPSwk), a symbiotic association of probiotic microorganisms. New findings of the technological, mechanical, and biological properties of the sample were studied. The EPSwk polymer presented an Mw of 6.35 × 105 Da. The biopolymer also showed microcrystalline structure and characteristic thermal stability with maximum thermal degradation at 250 °C. The analysis of the monosaccharides of the EPSwk by gas chromatography demonstrated that the material is composed of glucose units (98 mol%). Additionally, EPSwk exhibited excellent emulsifying properties, film-forming ability, a low photodegradation rate (3.8%), and good mucoadhesive properties (adhesion Fmax of 1.065 N). EPSwk presented cytocompatibility and antibacterial activity against Escherichia coli and Staphylococcus aureus. The results of this study expand the potential application of the exopolysaccharide from water kefir as a potential clean-label raw material for pharmaceutical, biomedical, and cosmetic applications.

Eco-friendly synthesis of phthalate angico gum towards nanoparticles engineering using Quality by Design (QbD) approach.

We developed a new hydrophobic polymer based on angico gum (AG), and we produced new nanoparticles to expand the applications of natural polysaccharides in nanomedicine. Phthalate angico gum (PAG) was characterized by 1H NMR, FTIR, elementary analysis, solubility, XRD, and TG. PAG was a hydrophobic and semi-crystalline material, a relevant characteristic for drug delivery system applications. As a proof of concept, nevirapine (NVP) was selected for nanoparticles development. Plackett-Burman's experimental design was used to understand the influence of several factors in nanoparticles production. PAG proved to be a versatile material for producing nanoparticles with different characteristics. Optimized nanoparticles were produced using desirability parameters. NVP-loaded PAG nanoparticles formulation showed 202.1 nm of particle size, 0.23 of PDI, -17.1 of zeta potential, 69.8 of encapsulation efficiency, and promoted modified drug release for 8 h. Here we show that PAG presents as a promising biopolymer for drug delivery systems.

Nanocellulose/palygorskite biocomposite membranes for controlled release of metronidazole.

The incorporation of drugs in nanocomposites can be considered a potential strategy for controlled drug release. In this study, a nanocomposite based on bacterial cellulose and the palygorskite clay (BC/PLG) was produced and loaded with metronidazole (MTZ). The samples were characterized using X-ray diffraction (XRD) Spectroscopy, thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM). The barrier properties were determined to water vapor permeability (WVP). Adsorption tests with PLG were performed using MTZ and drug release profile of the membranes was investigated. The results indicated that PLG increased the crystallinity of the nanocomposites, and greater thermal stability when PLG concentration was 15.0% (BC/PLG15) was observed. WVP of the samples also varied, according to the clay content. Adsorption equilibrium was achieved from 400 mg/L of the PLG and a plateau in the MTZ release rates from BC/PLG was observed after 30 min. Therefore, the results of this study show the potential of these nanocomposite membranes as a platform for controlled drug release.

Superabsorbent Hydrogels Based to Polyacrylamide/Cashew Tree Gum for the Controlled Release of Water and Plant Nutrients.

Agricultural production is influenced by the water content in the soil and availability of fertilizers. Thus, superabsorbent hydrogels, based on polyacrylamide, natural cashew tree gum (CG) and potassium hydrogen phosphate (PHP), as fertilizer and water releaser were developed. The structure, morphology, thermal stability and chemical composition of samples of polyacrylamide and cashew tree gum hydrogels with the presence of fertilizer (HCGP) and without fertilizer (HCG) were investigated, using X-ray diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA/DTG) and Energy Dispersive Spectroscopy (EDS). Swelling/reswelling tests, textural analysis, effect of pH, release of nutrients and kinetics were determined; the ecotoxicity of the hydrogels was investigated by the Artemia salina test. The results showed that PHP incorporation in the hydrogel favored the crosslinking of chains. This increased the thermal stability in HCGP but decreased the hardness and adhesion properties. The HCGP demonstrated good swelling capacity (~15,000 times) and an excellent potential for reuse after fifty-five consecutive cycles. The swelling was favored in an alkaline pH due to the ionization of hydrophilic groups. The sustained release of phosphorus in HCGP was described by the Korsmeyer-Peppas model, and Fickian diffusion is the main fertilizer release mechanism. Finally, the hydrogels do not demonstrate toxicity, and HCGP has potential for application in agriculture.

Biomineralization inspired engineering of nanobiomaterials promoting bone repair.

A biomineralization processes is disclosed for engineering nanomaterials that support bone repair. The material was fabricated through a hot press process using electrospun poly(lactic acid) (PLA) matrix covered with hybrid composites of carbon nanotubes/graphene nanoribbons (GNR) and nanohydroxyapatite (nHA). Various scaffolds were devised [nHA/PLA, PLA/GNR, and PLA/nHA/GNR (1 and 3%)] and their structure and morphology characterized through Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), and Atomic force microscope (AFM). Moreover, thorough biocompatibility and toxicity studies were performed. Here, in vivo studies on toxicity and cytotoxicity were conducted in aqueous dispersions of the biomaterials at concentrations of 30, 60, and 120 µg/mL using the Allium cepa test. Further toxicity studies were performed through hemolysis toxicity tests and genotoxicity tests evaluating the damage index and damage frequencies of DNAs through comet assays with samples of the animals' peripheral blood, marrow, and liver. Additionally, the regenerative activity of the scaffolds was analyzed by measuring the cortical tibiae of rats oophorectomized implanted with the biomaterials. Biochemical analyzes [glutamic pyruvic transaminase (GPT), glutamic oxaloacetic transaminase (GOT), urea, calcium, phosphorus, and alkaline phosphatase (ALP)] were also performed on blood samples. The results suggested a toxicity and cytotoxicity level for the GNR biomaterials at a concentration of 60 and 120 µg/mL, but non-toxicity and cytotoxicity for the 30 µg/mL concentration. The scaffolds obtained at a concentration of 0.3 mg/cm2 were not toxic in the hemolysis test and demonstrated no cytotoxicity, genotoxicity, and mutagenicity in the blood, marrow, and liver analyzes of the animals, corroborating data from the biochemical markers of GPT, GOT, and urea. Tissue regeneration was performed in all groups and was more pronounced in the group containing the combination of nHA/GNR (3%), which is consistent with the data obtained for the calcium, serum phosphorus, and ALP concentrations. Consequently, the study indicates that the engineered nanobiomaterial is a promising candidate for bone tissue repair and regenerative applications. STATEMENT OF SIGNIFICANCE: The scientific contribution of this study is the engineering of a synthetic hybrid biomaterial, in nanoscale by a pressing and heating process. A biodegradable polymeric matrix was covered on both sides with a carbonated hybrid bioceramic/graphene nanoribbons (GNR), which has hydrophilic characteristics, with chemical elements stoichiometrically similar to bone mineral composition. The nanomaterial displayed promising bone regeneration ability, which is the first example to be used in an osteoporotic animal model. Moreover, detailed biocompatibility and toxicity studies were performed on the nanomaterials and their compositions, which is of great interest for the scientific community.

Development of an Experimental Dentifrice with Hydroxyapatite Nanoparticles and High Fluoride Concentration to Manage Root Dentin Demineralization.

BACKGROUND: High-fluoride dentifrice is used to manage root caries, but there is no evidence whether its association with nanohydroxyapatite could provide an additional protection for root caries. Therefore, this study aimed to develop and evaluate the effect of an experimental dentifrice with high fluoride (F-) concentration and nanohydroxyapatite (nano-HA) on root dentin demineralization. MATERIALS AND METHODS: After formulation of dentifrices, root dentin specimens were randomly assigned to six groups (n = 10) using different dentifrice treatments: placebo; nano-HA without F-; 1,100 µg F-/g; 1,100 µg F-/g + nano-HA; 5,000 µg F-/g; and 5,000 µg F-/g + nano-HA. A pH cycling model was performed for 10 days, in which treatments were performed twice a day. After that period, the longitudinal hardness was evaluated and the area of demineralization (ΔS) was calculated. The formulated dentifrices were evaluated for primary stability, cytotoxicity, and other technical parameters. Two-way ANOVA and Tukey's test with p set at 5% were used for data analysis. RESULTS: The experimental dentifrices were stable and had no cytotoxicity. Regarding dentin demineralization, the placebo group significantly increased ΔS compared to all other treatment groups (p<0.001). The dentifrices containing 5,000 µg F-/g, regardless of the presence of nano-HA, led to a smaller lesion area in relation to the other treatments (p<0.001). CONCLUSION: The findings of this study suggest that nano-HA reduced dentin demineralization, and dentifrice with 5,000 µg F-/g dentifrices, regardless of the presence of nano-HA, showed a greater reduction in root dentin demineralization.

Antibacterial and cytotoxic properties from esterified Sterculia gum.

Sterculia gums, as karaya and chicha gum, are complex branched and polydisperse heteropolysaccharides which can have their applications extended by improving their characteristics through chemical modifications. The objective of this work was to increase the antimicrobial activity of karaya and chicha gum through chemical modification with maleic anhydride. The incorporation of anhydride in the gum structure was confirmed by the characterization techniques. The derived biopolymers were synthesized and characterized by FTIR, X-ray diffraction, Thermogravimetric analysis and elemental analysis. Antimicrobial activity was evaluated against the Staphylococcus aureus strain (ATCC 25923). Mammalian cytotoxicity assays were also performed by MTT and hemolysis tests. The derivatives showed excellent antibacterial action inhibiting almost 100% of bacterial growth and did not present significant cytotoxicity in mammalian cells. The results showed that the derivatives are promising for biomedical applications aiming the control of infectious diseases caused by S. aureus.

Solvent-free production of phthalated cashew gum for green synthesis of antimicrobial silver nanoparticles.

This work describes a solvent-free method for the chemical modification of cashew gum (Anacardium occidentale L.) using phthalic anhydride in different proportions with different reaction times. Four biopolymers were synthesized and characterized by FTIR, NMR, and elemental analysis. A computational chemistry study was conducted to understand better the reaction. Phthalated cashew gum was used in preparation of silver nanoparticles (AgNPs) by a conventional route, using sodium borohydride (NaBH4) as reducing agent, and for green route. AgNPs were evaluated for antimicrobial activity and characterized by UV-Vis spectroscopy, FTIR, nanoparticle tracking analysis, Zeta Potential analysis, and atomic force microscopy. AgNPs produced by the green route had an average size of 51.9 nm and Zeta Potential of -55.8 mV, and AgNPs produced by the conventional method had an average size of 47.7 nm and Zeta Potential of -39.3 mV. AgNPs synthesized using phthalated cashew gum showed antimicrobial activity against Staphylococcus aureus and Escherichia coli.

Solvent-free synthesis of acetylated cashew gum for oral delivery system of insulin.

Cashew gum (CG) is a biopolymer that presents a favorable chemical environment for structural modifications, which leads to more stable and resistant colloidal systems. The gum was subjected to an acetylation reaction using a fast, simple, solvent-free and low cost methodology. The derivative was characterized by infrared and NMR spectroscopy, elemental analysis, coefficient of solubility and zeta potential. The modified biopolymer was used as a platform for drug delivery systems using insulin as a model drug. Nanoparticles were developed through the technique of polyelectrolytic complexation and were characterized by size, surface charge, entrapment efficiency and gastrointestinal release profile. The nanoparticles presented size of 460 nm with a 52.5% efficiency of entrapment of insulin and the electrostatic stabilization was suggested by the zeta potential of + 30.6 mV. Sustained release of insulin was observed for up to 24 h. The results showed that acetylated cashew gum (ACG) presented potential as a vehicle for sustained oral insulin release.

Development of a low-cost electrochemical sensor based on babassu mesocarp (Orbignya phalerata) immobilized on a flexible gold electrode for applications in sensors for 5-fluorouracil chemotherapeutics.

There are increasing concerns regarding the risks arising from the contamination of manipulators of antineoplastic drugs promoted by occupational exposure or even in the dosage of drugs. The present work proposes the use of an electrochemical sensor based on a biopolymer extracted from the babassu coconut (Orbignya phalerata) for the determination of an antineoplastic 5-fluorouracil (5-FU) drug as an alternative for the monitoring of these drugs. In order to reduce the cost of this sensor, a flexible gold electrode (FEAu) is proposed. The surface modification of FEAu was performed with the deposition of a casting film of the biopolymer extracted from the babassu mesocarp (BM) and modified with phthalic anhydride (BMPA). The electrochemical activity of the modified electrode was characterized by cyclic voltammetry (CV), and its morphology was observed by atomic force microscopy (AFM). The FEAu/BMPA showed a high sensitivity (8.8 µA/µmol/L) and low limit of detection (0.34 µmol/L) for the 5-FU drug in an acid medium. Electrochemical sensors developed from the babassu mesocarp may be a viable alternative for the monitoring of the 5-FU antineoplastic in pharmaceutical formulations, because in addition to being sensitive to this drug, they are constructed of a natural polymer, renewable, and abundant in nature. Graphical abstract ᅟ.

Modified chitosan-based bioactive material for antimicrobial application: Synthesis and characterization.

The search for natural antibacterial agents to treat diseases caused by resistant microorganisms has been gaining increasing attention. Chitosan has been studied in several areas due to its particular properties. The grafting of hydrophobic chains into the chitosan molecule, turning it amphiphilic, may improve its antimicrobial activity by increasing electrostatic interaction with the bacterial cell wall. The objective of this work was to enhance the antimicrobial activity of chitosan by the reaction of N-acylation with maleic anhydride. For this purpose, molar ratios of 1:2, 1:5 and 1:10 chitosan: anhydride were investigated, and the obtained derivatives were characterized by elemental analysis, FTIR, thermal analysis and XRD where it was possible to prove the chemical modification of chitosan. The modified materials presented excellent antibacterial action against Staphylococcus aureus and Escherichia coli, evidencing no activity against the protozoan Leishmania amazonensis. Cytotoxicity assays by the MTT analysis and hemolysis indicated that the derivatives did not show toxicity in mammalian cells. The proposed modified chitosan compounds showed to be promising for biomedical applications since they allied excellent antibacterial activity and absence of cytotoxicity.

Modifying cellulose with metaphosphoric acid and its efficiency in removing brilliant green dye.

In this study, cellulose was chemically modified through the addition of the phosphorylating agent, metaphosphoric acid in order to obtain a new material (MPCel) with higher adsorptive properties than the starting material. Both materials were characterized by infrared spectroscopy, X-ray diffraction, solid-state phosphorus-31 nuclear magnetic resonance spectroscopy and thermogravimetric analysis. Maximal adsorption capacity, at 45°C for pure cellulose, was 90.5mgg-1, at pH=10 and contact time of 40min, with experimental isotherms better adjusted to the Langmuir model. MPCel at the same temperature conditions showed contact time of 10min, pH=10, and maximal adsorption capacity of 150.0mgg-1, being better adjusted to the Temkin model. The kinetic study of both materials followed the pseudo-second-order model. Modification successfully occurred and both adsorbents were shown able to be capable of removing the brilliant green dye, but MPCel was more efficient for purpose, when compared to the pure cellulose.

Potential of Cellulose Functionalized with Carboxylic Acid as Biosorbent for the Removal of Cationic Dyes in Aqueous Solution.

In the last decade, adsorption has been used to minimize the pollution caused by dyes, which represents a serious environmental problem. In this context, this work reports the preparation of phthalic anhydride-modified cellulose (PhCel), through the reaction of cellulose (Cel) with phthalic anhydride (Ph). The efficiency of the reaction was observed by elemental analysis, Fourier Transform Infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and thermogravimetry/derivative thermogravimetry (TG/DTG). The adsorbent matrix (Cel and PhCel) was used in the removal of crystal violet (CV) and methylene blue (MB) dyes in aqueous medium. In the kinetic study, the experimental data obtained had the best fit to the pseudo-first-order model. In general, the isotherms obtained at different temperatures had a best fit to the model proposed by Langmuir, and the CV and MB adsorption process in adsorbent matrixes can be favored strictly by hydrogen bonds and/or electrostatic interactions for Cel and electrostatic interactions for PhCel.

Obtaining the palygorskite:chitosan composite for modified release of 5-aminosalicylic acid.

This study's aim was to obtain composites from palygorskite (PLG) and chitosan (CS) in order to modify 5-aminosalicylic (5-ASA) release. Initially, the PLG:CS composite was obtained using glutaraldehyde (GLA) as a reticular agent. Then, PLG, CS and PLG:CS were characterized by means of analytical techniques such as CHN elemental analysis, surface area analysis, XRD, FTIR, DSC and TG, SEM, adsorption tests and release profiles. Based on analytical data, the formation of the PLG:CS composite which showed the presence about 19% of CS, decrease in specific surface area, morphological analysis modified, visible change of crystallinity, of FTIR and thermal analysis. In relation to the drug-composite interaction, PLG:CS exhibited a significant increase in adsorption with 5-ASA at 58.24% in relation to PLG and CS which were at 16.29% and 23.96% respectively. The release profiles show that the PLG:CS composite changed the 5-ASA release speed in analyzed simulated fluids (intestinal and stomach) unlike other systems. Thus, the PLG:CS composite with proven synergy of the PLG and CS inherent properties showing 5-ASA effective modified release. Hence, this composite has potential benefits for the vectorization of drugs.

Chitosan Hydrogel in combination with Nerolidol for healing wounds.

Chitosan is a natural polymer with antibacterial property, that is biodegradable, extremely abundant and non-toxic. This study aimed to develop and characterize chitosan hydrogels in combination with nerolidol, in order to optimize the antimicrobial and healing properties. The hydrogels were prepared using a reaction of the chitosan with acetic acid solution, followed by the addition of 2 or 4% of the nerolidol. Using thermogravimetry, differential scanning calorimetry and infrared spectroscopy, the incorporation of nerolidol in the hydrogel was confirmed. Direct contact tests using hydrogels and Staphylococcus aureus showed a synergistic effect in the materials, enabling total inhibition of bacterial growth. The hydrogel containing 2% nerolidol showed excellent healing effects. The beginning of re-epithelialization and reorganization of collagen was already observed on the 7th day of treatment. The material created proofed to be promising as a healing and antibacterial agent.

The systems containing clays and clay minerals from modified drug release: a review.

Clays are materials commonly used in the pharmaceutical industry, either as ingredients or as active ingredients. It was observed that when they are administered concurrently, they may interact with drugs reducing their absorption. Therefore, such interactions can be used to achieve technological and biopharmaceutical advantages, regarding the control of release. This review summarizes bibliographic (articles) and technological (patents) information on the use of systems containing clays and clay minerals in modified drug delivery. In this area, formulations such natural clay, commercial clay, synthetic clay, composites clay-polymers, nanocomposites clay-polymers, films and hidrogels composites clay-polymers are used to slow/extend or vectorize the release of drugs and consequently they increase their bioavailability. Finally, this review summarizes the fields of technology and biopharmaceutical applications, where clays are applied.